With full support for Canon E-TTL / E-TTL II, including high-speed sync, and a built-in 2.4GHz radio system, the Godox TT685C Thinklite TTL Flash will make it easy to create both simple and elaborate lighting setups. When mounted on camera, it is an effective lighting tool with a powerful guide number of 197' at ISO 100 and 200mm, a zoom range of 20-200mm, and the ability to tilt from -7 to 90° and rotate 360°. As a TTL-capable unit, the TT685C can also operate as a full wireless master or slave unit with TTL functionality.
Operation is intuitive with a rear LCD panel that shows settings. Also, the flash is equipped with a Wireless Control Port for attaching an optional remote control set and it has a 3.5mm sync port for basic wired connectivity. It runs on four AA batteries, which help provide a recycle time of 0.1-2.6 seconds.
- An integrated 2.4GHz X radio system is incorporated into the TT685C for wireless triggering. Able to be set up as a master or slave, this flash will help you create a versatile lighting setup with a range of 328' and support for 32 channels and five groups. It can also work with an optional X series transmitter for creating more elaborate setups.
- Being compatible with Canon's E-TTL / E-TTL II system, users will enjoy numerous automated flash settings and the ability to use functions such as high-speed sync.
- With a guide number of 197' at ISO 100 and 200mm the TT685C will easily illuminate most subjects. It also features a zoom head with a range of 20-200mm and a 14mm wide-angle panel for using a variety of different lenses.
- Manual power control from 1/1 to 1/128 in 1/3 EV steps.
The flash head can be tilted from -7 to 90° and rotated a total of 360° for controlling bounce and where the light falls on the scene.
Optical master/slave transmission is available for working with other standard flashes.
- Using an optional FT series remote control set, users can connect to the wireless control port to gain wireless control over the flash's power settings.
- A 3.5mm sync port is available for setting up a wired connection to a camera or trigger.
- This flash runs on four alkaline or NiMH AA batteries which help deliver about 230 full-power flashes and recycle times of 0.1-2.6 seconds.
- USB connection for installing future firmware updates.
|WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.|
Attention to all California residents, Proposition 65 or officially known as, the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. August 2016, OEHHA adopted new regulations, to go into effect on August 30, 2018, which changes the information that is required in or on Proposition 65 warnings.
We want you to know and be aware of our product safety and CameraMall is taking all of the necessary steps to comply with the applicable safety and health requirements made by this Proposition 65.
Additional Information about Proposition 65
For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.
Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.
To give CameraMall any notices of an alleged violation of the California Health and Safety Code Section 25249.5 or 25249.6, you must send us a notice at firstname.lastname@example.org.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.